Adjustable preset regulators for low pressure and high flow rate LP gas furnaces burners

LOW PRESSURE REGULATORS

Service Regulators

These regulators are used in pressure reducing system for LPG & Natural gas. They are used to reduce the gas pressure from 4 kg/ to 75mbar before supplying it to the domestic feeder line. These regulators are having built in slam shut off valve and creep relief valve (safety relief valve). These regulators are available in two models R-4405 & R4403 depending upon flow requirements.

Type of Regulator	Inlet Pressure Range	Outlet Presure Range	Gas Flow Rate	End Connection	Gas

R4405	0.5 - 4 Kg /	200 - 750 mmwc	30 / hr	Inlet : 1/2"BSP(INT) Outlet : 3/4"BSP(INT)	Natural Gas, LPG
R4403	4 Kg /	200 - 750 mmwc	60 / hr	3/4"BSP(INT) or 1"BSP(INT)	Natural Gas, LPG

Preset Pressure Regulators

These regulators are having preset outlet pressure. However the outlet pressure can be slightly adjusted by rotating the spring adjusting screw.
The industrial Pressure Regulator R-4109 is available with 4 different types of preset outlet pressures. These are suitable for canteen, restaurants & small Industrial Furnaces.
R-4110/R-4301 are a low pressure medium flow pressure regulators, mainly used for industrial furnaces & other gas appliances. R - 4202 regulator is mainly suitable for Natural Gas.

Type of Regulator

Inlet Pressure Range

Outlet Pressure Range

Gas Flow Rate

End Connection

Gas

R4109

1 / 17 Kg /

a)	0.03 Kg /
b)	0.3 Kg /
c)	0.7 Kg /
d)	1 Kg /

/ hr

Inlet :
21.8x14TPI(L.H) Union Nut

Outlet :
1/2"BSP(INT)

LPG

R4110

1 / 17 Kg /

0.03 - 0.3 Kg /

/hr

Inlet :
1/2"BSP(INT)

Outlet : 1/2"BSP(INT)

LPG, Natural Gas

R4301

1 / 17 Kg /

0.03 - 0.3 Kg /

/ hr

1"BSP(INT)

LPG, Natural Gas

R4202

1 / 17 Kg /

0.03 Kg /

0.5 Kg /

/ hr

30

/ hr

1/2"BSP(INT)
or
1/2"BSPT(INT)

Natural Gas

Pre-Set Regulators for Low Pressure & High Flow rates

These regulators are low pressure high flow precision control pressure regulators and are mainly used as second stage pressure regulators. These are also used in medium to bigger size furnaces. These regulators control the outlet pressure very precisely.

Type of Regulator

Inlet Pressure Range

Outlet Pressure Range

Gas Flow Rate

End Connection

Gas

R6111	1.5 Kg /	0.03 - 0.15 Kg / (30-150 mbar)	60 / hr	1.5"-2" BSP (INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas
R6106	1.5 Kg /	0.01 - 0.1 Kg / (10-100 mbar)	120 / hr	1.5"-2" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas
R6107	1.5 Kg /	0.01 - 0.05 Kg / (10-50 mbar)	150 / hr	1.5"-2" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas
R6410	1.5 Kg /	0.03 - 0.1 Kg / (30-100 mbar)	600 / hr	3" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas

Preset Pressure Regulator For Low Pressure, High Flow

These regulators are low pressure high flow pressure regulators. These are mainly used where the inlet pressure is varying in a wider range. These regulators are suitable for medium size furnace.

Type of Regulator

Inlet Pressure Range

Outlet Presure Range

Gas Flow Rate

End Connection

Gas

R5102	1 - 5 Kg /	0.03 - 0.15 Kg / (30-150 mbar)	60 / hr	1.5"-2" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas
R5103	1 - 5 Kg /	0.02 - 0.1 Kg / (10-100 mbar)	120 / hr	1.5"BSP(INT) or 2" BSP(INT) flanged end as per ANSI / BS Std.	LPG, Natural Gas
R5104	1 - 5 Kg /	0.01 - 0.05 Kg / (10-50 mbar)	150 / hr	1.5"BSP(INT) or 2" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas
R5105	1 - 5 Kg /	0.03 - 0.1 Kg / (30-100 mbar)	600 / hr	3" BSP(INT) or flanged end as per ANSI / BS Std.	LPG, Natural Gas

Go to top

Address

Shree Towers , 381 Bhawani Peth,
Near Juna Motor Stand, Pune 411042. India

Telefax No.

020 - 26448264 / 26454456 / 26434433

Email

punegas@vsnl.com