Ador - Electrical Cremation Furnaces

In recent year the PED has enhanced its product portfolio by adding Environmental Engineering products to its reputed line of welding automation products and systems. PED?s capabilities are highlighted by providing customized system from design to procurement and turnkey delivery. The project management profile at PED comprises of

Waste Management
Bio-Medical / Hazardous Waste
Water and Wastewater

Cremation Furnaces

Gas Flaring and Incinerations System

Welding Automation Products and Systems
Column & Boom, Rotators & Positioners
Welding-Special Purpose Machine?s
Welding & cutting Robots

Proven and Established Products
Ador has been designing and manufacturing electric cremation furnaces for the past 10 years and is a supplier to municipal corporation, trusts and private crematoriums throughout the country. Ador has supplied over 35 furnaces to crematoriums and has achieved a level of trust and customer satisfaction that ensures repeat orders from many customers including the municipal corporations of cosmopolitan cities such as Mumbai and Bangalore and even smaller places such as Rajkot.

After extensive product research Ador has expanded into manufacturing fuel fired cremators as well.

These cremators come assembled and ready to install and have smaller space requirements and are most cost efficient. All cremators require a minimum amount of labour and the simplicity of the design ensure easy operation.

Common Feature of Fuel Fired and Electrical Cremation Furnaces.

Automation temperature control for pre post combustion zones.

Automatic fail safe against excess temperature.

Robust Hearth Bricks providing the main support on which the body / coffin is placed.

Excellent Environmental Performance - emissions conforming to current CPCB norms.

Heating System-
Team Incineration Chamber one primary chamber and a secondary chamber with heating elements embedded within

Shaped Refractories - including over 40% Alumina in areas of heavy wear.

Robust Construction Design - capable of 8 to 10 cremations per day. Cremation times ranging between 45 to 60 minuts are fully attainable.

High Performance Cyclonic/Vane/Ventury type wet scrubber - clean the smoke and ensures pollution free discharge through the chimney.

Ador - Fuel Fired Cremators / Incinerators

Heating System -
Primary and secondary combustion zone burners to ensure a respective zone temperature of 8000 C to 10000 C which can be maintained under all conditions of normal operation

Highest Quality Refractories - Including 63% Alumina in areas of heavy wear

Robust Construction Design - Capable of 3 to 5 cremation per day and cremation time between 110 and 130 minutes is completely attainable.
External Scrubber is optional
Low Capital Cost - building requirements are much smaller is comparison to the electric furnace
Cost of Fuel - is 30% cheaper than electricity
Assembled Packaged Unit ensure less installation time on site
PLC Control Panel
Heat Exchanger - for heat recovery at the outlet of the furnace.